The RF admittance level controller uses high-frequency technology to generate a low-power RF signal from the electronic circuit to the probe. The probe acts as a sensitive element and feeds back signal changes caused by the dielectric constant of the level to the electronic circuit. Including capacitance and conductance
The RF admittance level controller uses high-frequency technology to generate a low-power RF signal from the electronic circuit to the probe. The probe acts as a sensitive element and feeds back signal changes caused by the dielectric constant of the level to the electronic circuit. Including the change of capacitance and conductance, so the electronic circuit processes the comprehensive change signal of capacitive reactance and impedance. The phase detection technology is used to detect this change, and the output of the relay is processed.It is an RF admittance measurement technology that is improved on the basis of the original capacitance measurement, and represents a new level of current level measurement.Specific models are: RF800G1A, RFC-00G1A, RF8-00G1A, RF805G1A, RF8-05G1A, RFC-05G1A, RFC05G1A, RF8-05G2A, RF805G2A, RFC-05G2A, etc.
RF type RF admittance level controller is an avant-garde replacement product for international level controllers across the century. It has been widely used in European and American countries and Japan, and domestic users are also replacing it with old products.It can detect all materials without being affected by changes in parameters such as material density, particle size, chemical composition, deposition viscosity, and electrical conductivity.Widely used in the control of liquid, powder, slurry, solid and other materials.
Level meter features: 1. Strong versatility: suitable for various occasions, can detect particles, fly ash, conductive, non-conductive liquid, viscous materials; 2. Anti-adhesion circuit: Advanced anti-adhesion circuit design can eliminate material adhesion and generate false error signals; 3. Power failure protection mode: low or high fault alarm.Field adjustable.
主要技术参数：Main technical parameters oflevel meter: 1. Power supply voltage: 220CAC ± 15% 50Hz; 24VDC ± 5%; 2. Power consumption: 4W; 3. Output signal: relay output double-pole double-throw (DP / DT); 5A (resistive), 220VAC; 4. Ambient temperature: -40 ～ 70 ℃; 5. Sensitivity setting: 0.5 ～ 500pF (adjustable); 6, time: 0 ~ 30 seconds adjustable (on or off); 7. Power failure protection mode: low or high fault alarm, adjustable on site. 8, installation form: ⑴ flange installation: according to the flange standard provided by the user; ⑵Thread installation: 3/4 "NPT